Skip to content
Vitanov Glass

Glass guide

Glass replacement or a new window?

Identify whether the failed part is the glass, the frame or the whole opening.

Fog between the panes

Persistent condensation inside an insulated unit commonly indicates failure of the perimeter seal. Cleaning the exposed surfaces cannot remove it. Drilling or venting does not restore the original sealed assembly's performance.

Keep a sound frame where appropriate

Replacing the sealed glass unit may be possible when the frame is sound and the glazing pocket can accept the correct make-up. Bent, deteriorated or incompatible frames may require a wider replacement scope.

A whole-window scope

A new frame changes perimeter, trim and cladding conditions. Changing opening size adds structural and permit questions. These are different scopes and should not be compared as if they were identical quotes.

What to send with an inquiry

Share inside and outside photos, approximate dimensions, the location and the concern: breakage, fogging, operation, drafts or appearance. Do not handle loose or broken glass to obtain a measurement.

Signs the glass unit has failed

Haze or droplets between the panes that cannot be wiped off, a visible film, or a crack in one pane all point to the sealed glass unit. The frame may still be perfectly serviceable, which is when glass-only replacement makes the most sense.

Signs the window itself has failed

Rot or corrosion in the frame, water stains below the window, sashes that will not lock or stay open, and air leaking around the frame point to a wider problem. New glass will not fix a frame that leaks.

Matching the existing glass

A replacement insulated unit should match the overall thickness the frame accepts and, where needed, the tempering, tint and Low-E coating of the other windows so the elevation looks consistent. The spacer and gas fill are chosen at the same time.

Cost drivers

Glass-only replacement is typically less expensive than a new window, but size, tempering, Low-E, tint, access height and the number of units affect price. Full replacement adds the frame, removal, flashing, trim and possible wall repairs.

Safety first with broken glass

Keep people and pets away from cracked or loose glass. Tape and cardboard can temporarily contain a cracked pane, but do not remove broken glass from a frame by hand. Photograph the damage and the glass marking if visible.

Common questions

Can a foggy window be defogged?

Venting or drilling may temporarily reduce visible moisture but does not restore the sealed unit's insulating performance. Replacing the insulated glass unit is the durable fix when the frame is sound.

How do I know if my window glass is tempered?

Look for a small permanent mark in a corner of the pane. Glass in doors, next to doors, in showers and near floors is often required to be safety glass, so assume it may be and specify it in the replacement.

Is it worth upgrading to Low-E when replacing glass?

Often, if the frame can accept the unit. Low-E coatings reduce heat transfer and can cut glare and fading. Match the coating across a façade to avoid visible color differences between windows.

General glass planning information. Manufacturer ratings, prices and delivery promises require project-specific confirmation.

Start a project

Bring your questions to the opening.

Share the location, opening and intended use so the right glazing scope can be considered.

Request a quote

Companies & industry resources

Vitanov Construction is a related company operated by the same owner. Hardware and glazing-system suppliers are listed as product resources; other glass and construction companies are industry connections. Listings do not imply a verified supplier agreement, partnership or endorsement of Vitanov Glass.

Request a quote →