Skip to content
Vitanov Glass
← All services

Residential · Commercial

Aluminum Windows & Exterior Doors

A good exterior opening is a complete assembly: frame, glass, hardware, anchorage and perimeter seals. We start with the use and exposure, then review the system that suits them.

Aluminum commercial entrance with glass door and sidelights
Thornton commercial entrance. Owner-authorized installation reference. Not a Vitanov Glass project.

Features & options

  • ▸Window configurations
  • ▸Exterior entrances
  • ▸Sliding & lift-slide
  • ▸Thermal specification

Applications

  • ▸New and replacement openings, terrace doors and large glazed living spaces.
  • ▸Window packages and entrances coordinated with architects and general contractors.

Materials

  • ▸Manufacturer documentation is not an automatic US or Colorado code approval.
  • ▸Supply, installation scope and specific product availability are confirmed per project.
  • ▸Opening changes may require structural review and permits.

System options are reviewed for your project. Product availability, engineering, performance documentation and installation responsibilities are confirmed before ordering.

/01 — System planning

Systems & configurations.

01

Window configurations

Fixed, casement, awning and tilt-and-turn arrangements are considered against ventilation, egress and opening geometry.

02

Exterior entrances

Hinged aluminum doors, sidelights and transoms are coordinated with threshold, closer, locking and accessibility needs.

03

Sliding & lift-slide

Conventional sliders, lift-and-slide and narrow-sightline systems have different hardware, seals and sill requirements.

04

Thermal specification

Frame thermal breaks, insulated glazing, coatings and assembly performance must be reviewed together rather than inferred from a photograph.

/04 — Before fabrication

Plan the complete opening.

Share the project location, photographs, drawings and approximate dimensions. Final glass dimensions and hardware preparation follow field measurement and the agreed specifications.

Project review checklist

  • ▸Manufacturer documentation is not an automatic US or Colorado code approval.
  • ▸Supply, installation scope and specific product availability are confirmed per project.
  • ▸Opening changes may require structural review and permits.

/05 — System planning

Safety, thickness & limitations.

01

Specify the insulated unit, not only its thickness

Pane thickness, cavity, spacer, coatings, gas fill and any laminated layer form a complete insulated glass make-up. Match safety needs, design loads and documented assembly performance. Replacing a pane with a different tint or coating can change the appearance and solar performance of adjacent openings.

02

Safety glazing at hazardous locations

Doors, certain adjacent panels and other hazardous locations can require safety glazing under the applicable code. Tempering and lamination are different processes, and neither product name alone proves suitability. Confirm required markings, tested glass make-up and installation details for the opening.

/06 — System planning

Installation interfaces.

01

Thermal breaks and sill operation

Thermally broken aluminum frames, insulated glass, thresholds and perimeter joints work together. Sliding, lift-slide, hinged and tilt-and-turn families need their own documentation; European catalog ratings are not US project approval.

/07 — System planning

From measurement to handover.

01

Review & measure

Review the use, address, existing assembly and access. Final measurement follows finished substrates and approved hardware; photos and approximate dimensions support planning but are not fabrication instructions.

02

Define the assembly

Confirm glass make-up, sizes, support, hardware, safety requirements and perimeter details. Where needed, obtain engineering, product submittals and approval before nonreturnable fabrication.

03

Prepare & install

Agree on protection, removal, temporary closure and adjacent-trade responsibilities. Use the documented setting, anchoring and sealant details for the selected assembly; preserve designed drainage and clearances.

04

Check & hand over

Check operation, alignment, seals and safe use. Explain curing restrictions and cleaning compatibility. Included testing, warranty and follow-up responsibilities must be stated in the written agreement.

Budget / Scope before price

What changes the cost?

No universal installed price applies to every opening. Request a written scope separating glass, hardware, installation, removal and any engineering, permit, travel or adjacent-trade work. Product performance and thickness examples are educational; final selection must follow the applicable requirements and the selected manufacturer's limits.

FAQ

Common questions.

What determines the aluminum windows & exterior doors scope?

Manufacturer documentation is not an automatic US or Colorado code approval. Supply, installation scope and specific product availability are confirmed per project. Opening changes may require structural review and permits.

What should I send with an inquiry?

For aluminum windows & exterior doors, share inside and outside photos, approximate dimensions, location and the specific concern or intended use. Final dimensions require field measurement.

How are glass and hardware chosen?

Fixed, casement, awning and tilt-and-turn arrangements are considered against ventilation, egress and opening geometry. Hinged aluminum doors, sidelights and transoms are coordinated with threshold, closer, locking and accessibility needs. Conventional sliders, lift-and-slide and narrow-sightline systems have different hardware, seals and sill requirements. Frame thermal breaks, insulated glazing, coatings and assembly performance must be reviewed together rather than inferred from a photograph.

Areas we serve / Location review

Front Range project planning.

City coverage is not yet confirmed. These are planning resources, not a promise of service availability or a list of local offices. Call with your address and scope before scheduling or ordering.

  • Littleton

    Remodels, covered outdoor living and existing openings

  • Highlands Ranch

    Home renovations and coordinated exterior changes

  • Denver

    Urban access, tenant improvements and commercial entrances

  • Aurora

    Repair diagnosis and phased property upgrades

  • Lakewood

    Existing-building interfaces and exterior exposure

  • Parker

    Compare sliding and lift-slide assemblies using sill geometry, drainage and documented thermal performance, not sightline width alone.

  • Castle Rock

    Deck structures, large panels and installation access

  • Boulder

    Request whole-assembly thermal and air/water documentation for the actual configuration, not a rating from a different product family.

  • Colorado Springs

    Scope preparation and coordinated site visits

  • Fort Collins

    Compatibility, tenant coordination and replacement scope

View location directory

More services

Related capabilities.

Start a project

Planning aluminum windows & exterior doors?

Share the location, opening and intended use so the right glazing scope can be considered.

Request a quote

Companies & industry resources

Vitanov Construction is a related company operated by the same owner. Hardware and glazing-system suppliers are listed as product resources; other glass and construction companies are industry connections. Listings do not imply a verified supplier agreement, partnership or endorsement of Vitanov Glass.

Request a quote →